trainings, or trngs - collection that gives you access to all trainings in the app.
Commands
| Command
|
Description
|
| list
|
Returns training list. Currently it is only used in console for retrieving training list.
pranabreath://trainings?cmd=list
pos id public_id name
0 1 1 Clear mind
1 2 2 Relax
2 3 3 Calming
3 4 4 Power
4 5 5 Harmony
5 6 6 Anti-stress
6 7 7 Anti-appetite
7 8 8 Cigarette replace
8 9 11 Bhastrika
pranabreath://trainings - It is a default command when only collection is defined without an item, so if we omit the command it will return the same result.
|
| import
|
Import the specified training into the app.
|
| create
|
Create the training with defined parameters. If training with such name already exists - new training will not be created. Instead all parameters will be applied to this training.
pranabreath://trainings?cmd=create&name=Serenity&trng_type=1 - Create meditation with name "Serenity".pranabreath://trainings?cmd=create&name=4_7_8_Breathing&dur_prep_time=5000&trng_cycles={"mValues":[{"mInhaleUnit":4,"mRetainUnit":7,"mExhaleUnit":8,"mMethodsBitSet":129,"mSecPerUnit":1000}],"mKeys":[0,]} - Create training with name "4_7_8_Breathing", with 5 seconds preparing time, and 4:7:8:0 ratio
|
| start
|
Starts the selected training. If there is no an entered training - nothing happens, if only the training name is set from public training list, in such case it will be imported automatically and started.
pranabreath://trainings/Clear_mind?cmd=start - Clear mind training will be selected and started. Also it will bring the app to foreground with Training tab selected.pranabreath://trainings/Some_custom_name?cmd=start - If there is no "Some_custom_name" in the app - nothing happens.pranabreath://trainings/2?cmd=start - Training with id == 2 will be selected and started.pranabreath://trainings/Bhastrika?cmd=start - Training with name "Bhastrika" will be selected and started. If there is no such training Bhastrika training will be imported and started.
|
| delete
|
Delete the selected training. If there is no an entered training - nothing happens
|
| info
|
|
Parameters
| Parameter
|
Description
|
| name
|
Name of the training.
|
| public_id
|
Indicates public id of the training. All trainings in this list have their own public_id. Readonly value.
pranabreath://trngs?cmd=import&public_id=25 - Import training with public_id equals 25 which is Ha breathing training.
|
| trng_type
|
Is a kind of the training. Value range is [0 - breathing session, 1 - meditation].
pranabreath://trainings?cmd=create&name=Serenity&trng_type=1 - Create meditation with name "Serenity".
|
| pos
|
Position of the training in the training list.
pranabreath://trainings/Clear_mind?pos=9999 - Move the Clear mind training to the very bottom of the list.
|
| curr_level
|
Selected complexity level of a training (if applicable). Value range is [1, 5]
pranabreath://trngs/1?curr_level=3 - Set complexity level to "Advanced" for clear mind training
|
| dur_time, or duration
|
Training duration, in milliseconds (if this value is set, training duration mode will be measured in amount of time). Value range is [1, 999]
|
| dur_num_cycles, or num_iterations
|
Training duration, in amount of cycles (if this value is set, training duration mode will be measured in amount of cycles). Value range is [1, 999]
pranabreath://trainings/Relax?dur_num_cycles=18 - Set training duration to 18 cycles for the Relax training.
|
| dur_prep_time
|
Preparing time duration, in milliseconds. Value range is [0, 60000]
|
| dynamic, or trng_cycles
|
The object which represents breathing or repose cycles of the training.
pranabreath://trainings/15?dynamic={"mValues":[{"mInhaleUnit":1,"mExhaleUnit":1,"mSecPerUnit":6500}{"mInhaleUnit":1,"mExhaleUnit":1,"mSecPerUnit":7000}{"mInhaleUnit":1,"mExhaleUnit":1,"mSecPerUnit":7300}],"mKeys":[0,1,2,]} - Set the 3 cycles with [[Ratio_of_breath_cycle|ratio] 1:0:1:0. First cycles has 6.5 seconds per ratio unit, second 7 seconds and third 7.3 seconds.
|
| dynamic_enabled
|
Trigger dynamic mode. Value range is [true, false].
pranabreath://trainings/Harmony?dynamic_enabled=true - Enable dynamic mode for the Harmony training.
|
| custom_chants
|
The custom chants of the training.
pranabreath://trainings?cmd=create&name=Chanting_breathing&custom_chants=["Booom","Vaaam", "Raaam"]&dynamic={"mValues":[{"mInhaleUnit":1,"mExhaleUnit":1,"mSustainUnit":2,"mChantsBitSet":1073742800,"mSecPerUnit":3000}],"mKeys":[0,]}
|
| note
|
The training note.
|
| json_data
|
Data of training (.trng) file for importing.
pranabreath://trainings?cmd=import&json_data={"ENTRY":"TRAINING","name":"my_training"}" - Import the training with "my_training" name.
|